5310-99-547-5506

Flat Washer

5310995475506 995475506 SST/Y/264/20/0001 SHEET 001 ISS- Y/264/20/0001/000 ISSUE 005 ITE- Y/264/20/0001/113 Y/264/20/0001/113 SHEET 001 ISS- 001294098/002 ISSUE 003 PART 11- SST/Y/264/20/0001/113 SST/Y/264/20/0001/113 SHEET 001- SST/Y/264/20/0001/000 PART 113 SST/Y/264/20/0001/000-113 SST/Y/264/20/0001/000 ISSUE 005- SST/Y/264/20/0001/000 ITEM 113 001294098 SHEET 002 ISSUE 003 P- Y/264/20/0001/000 ITEM 113 Y/264/20/0001/000 PART 113 Y/264/20/0001/000-113 001294098/002/003/113 001294098/113 001294098 PART 113 SST/Y/264/20/0001/000 001294098 001294098/002

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer