5310-99-545-9771
Flat Washer
5310995459771 995459771 A3062
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-99-545-9771
Request a Quotation from participating marketplace vendors
Related Documents 5310-99-545-9771 5+ Documents (More...)
Flat Washer 5310995459771 995459771,A3062 Documents 5310-99-545-9771 1+ Documents (More... ) https
59825975151315982151315982 PALO SOSTEGNO Restrictions https//www.nsnlookup.com /cage Ufema Srl (CAGE Code A3062
/fsg-53/fsc-5325/uk
Flat Washer 5310995459771 995459771,A3062 5310-99-545-9771 5310995459771 995459771 is a washer
What is CAGE Code A3062?
Srl located at Viale Zanotti 90, Gropello Cairoli (Pavia), 27027, Italy.Who is CAGE Code A3062?
) Supply Items Approved for CAGE A3062 Page 1 of 1 6625-15-218-6823 Analizzatore Di Spe HS801-AWGRNCC
6625-15-218-6823 Italy (ZR) Approved Sources 6625-15-218-6823 Part NumberManufacturerStatusHS801-AWG A3062
Restrictions 5310-99-545-9771
Approved Sources 5310-99-545-9771
- Part Number
- Manufacturer
- Status
- A3062
- Manufacturer
- K8775 - Wells Valves Division (Endeavour (Active)
- Primary Buy
- Primary Buy