5310-99-543-5665

Flat Washer

5310995435665 995435665 BS4320 PS-163 17-L-0117 BS4320 TABLE 1 FORM A T822548 005418336 ITEM 7 005418336/7 17-L-0117 ITEM F4 07289-11-00 021L601/Y-981 376L602/RE250/7 98810601 0010170 HO-CH-4-510 ITEM 24 376L602/RE250 ITEM 7 1-07289-00-00 ITEM 11 652-0009 HLN1033 ITEM 318 21271-0050-3160 991-4-01497-016 ES114H1 WE123B2 98PJ01-371 11-2/2-005 99-562-2097

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer