5310-99-543-3218

Flat Washer

5310995433218 995433218 BS4320 BS4320-TABLE 1 FORM A M12 GF60995 ND7692 HO-CH-4-510 ITEM 25 52/296/6.61 911155 WFASSM12 A8-FA-101 14-2/38-010 BS4320TABLE1 25-6/3-020 A8-20B-01 ITEM 31 14-3/1-043 A8-FA-095

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer