5310-99-526-6876

Flat Washer

5310995266876 995266876 004471508 004471510 MV/00361/CN/961 MV/01040/AZ/008/00 004532408 004471220 SU. 73065 SU.7117 MV/00361/AZ/261 MV/01664/A2/020 78-00012 004471508 PART 8 MV/00361/CN/961 PART 8 004471220 PART 8 SU. 73065 ITEM 8 SU.7217 PART 8 SU.92565 PART 8 MV/01040/AZ/008/00 PART 8 H970-377802 H970-526-6876

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer