5310-99-526-6201

Flat Washer

5310995266201 995266201 SU.49015 004475100 SU.49515 MV/01664/AZ/024 78-00016 004475100 PART 8 SU.49015 PART 8 SU 7010 PART 8 SU.49515 PART 8 MV/01664/AZ/024 PART 8 004471763 PART 8 MV/01040/AZ/002 PART 8 H970-373570 H970-526-6201

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer