5310-99-509-6779

Primary Buy RNCC 3 RNVC 2 DAC 2 3574758/05/404 https//www.nsnlookup.com /fsg-53/fsc-5310/uk 5310-99-509-6779
Disc-Lock Washer 5310995096779 995096779 JavaScript in your web browser . 5310-99-509-6779Disc-Lock
Washer5310995096779 995096779 3567410 3574758/05/404 ITEM 34 3574758/05/404/34 Managed by United Kingdom

3580445RNCC: 3 | RNVC: 2 | DAC: 22580508/06/404 ITEM 6RNCC: 5 | RNVC: 2 | DAC: 2 16 Aug 2007 5310-99-509-6779

1330-00-356-7410 1330003567410 003567410

5930-12-356-7410 5930123567410 123567410 is a switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. the action may be momentary, with mechanical return. the actuating device may or may not be an integral part of the switch. the item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. excludes light-switch; light-switch assembly; switch, beam selecting, headlight; switch, foot; switch, interlock; switch, pressure; switch, push-pull; switch, sensitive and switch assembly. for devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter, motor and controller, motor.

5365-01-356-7410 5365013567410 013567410 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.