5310-99-423-2645

Flat Washer

5310994232645 994232645 40A/1939 3E9250-69 3E92501TEM69 B6628-61 MTDS24A12-16-04 UWEA1746-309 JT.18553-126 B7072-65 E10576-67 H606-227019 H606-418152 5330-854012 99-134-5490 99-437-5931 H606-261570 H606-288215 0265-6018 0278-16412

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer