5310-99-400-0474

Flat Washer

5310994000474 994000474 BS3410 BS3410T3:1/2X0.092S S05725/05 924C162ITEM4 PC1091B 013105 PST15905 ASL1552-9 992633 ST013105 6750322 1410-0005 0920007 2131-205 LV7RRST15905 K20809 UX17108 729-324095 11-454-7-18-1727 W20PERK48-392 18Q1516 18Q291 H700-155658 W17WSM47K20809 0821PE0920007

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer