5310-99-361-4569

Flat Washer

5310993614569 993614569 48-07704-115 48-07704-GAA.(P) SHEET 1 48-07704-GAA.(P) SHEET 1 ITEM 1- 48-07704-GAA.(S) SHEET 2 48-07704-GAA.(S) SHEET 2 ITEM 1- 48-07704-GAF.(P) SHEET 1 48-07704-GAF.(P) SHEET 1 ITEM 1- 48-07704-GAF.(S) SHEET 2 48-07704-GAF.(S) SHEET 2 ITEM 1- 48-07704-GAR.(P) SHEET 1 48-07704-GAR.(P) SHEET 1 ITEM 1- 48-07704-GAR.(S) SHEET 2 48-07704-GAR.(S) SHEET 2 ITEM 1- 001293709 001293709 ITEM 115 001293710 001293710 ITEM 115 001293711 001293711 ITEM 115 001293712 001293712 ITEM 115 001293714 001293714 ITEM 115 001293715 001293715 ITEM 115

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer