5310-99-348-0502
Flat Washer
5310993480502 993480502 STD/00034576 - 22 STD/00034576 ITEM 22 STD/00034576/22
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-99-348-0502
Request a Quotation from participating marketplace vendors
Restrictions 5310-99-348-0502
End Users 5310-99-348-0502
- United Kingdom (ZK)
Approved Sources 5310-99-348-0502
- Part Number
- Manufacturer
- Status
- STD/00034576 - 22
- Manufacturer
- K6451 - Bae Systems Marine Limited (Active)
- Primary Buy
- Primary Buy
- STD/00034576 ITEM 22
- K6451 - Bae Systems Marine Limited (Active)
- Secondary Buy
- Secondary Buy
- STD/00034576/22
- K6451 - Bae Systems Marine Limited (Active)
- Secondary Buy
- Secondary Buy