5310-99-346-9445

Flat Washer

5310993469445 993469445 SST/M/790/00/0001/000 SHEET 034- SST/M/790/00/0001/000/034 SST/M/790/00/0001/000/216 001303889 001303889 PART 216 001303889 SHEET 034 001303889/014 001303889/034 001303889/216 001303889/SHEET 014 SST/M/790/00/0001 SST/M/790/00/0001/000 SST/M/790/00/0001/000 PART 216 SST/M/790/00/0001/000 SHEET 014 SST/M/790/00/0001/000 SHEET 034 SST/M/790/00/0001/000/014 36011260000

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer