5310-99-139-0070

Flat Washer

5310991390070 991390070 BS4320 WC106041 BS4320 FORM C-M6 75300602010159 WC106041L 39-2021 ND 14489X GR/27729/A ITEM 14 ND7460 991-4-01679-113 7.530.06.02.01.01.59 FL640-006 (241)AE095WC106041L AC/12/16/5301 AC/12/01/01314 AC/12/1/1314 AC/12/15/3301 WC106001 R2003021-CD00 FV 2040197 ITEM 212 UW232A1 AB/01/15/4301 BS4320-M6X14-A2D WC106044 FV 2040197-212

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer