5310-99-135-1536

Flat Washer

5310991351536 991351536 BS3410 7030-006-009-59-00 102208-13 103977-21 9100310115 GLY0751-5-6 031225 T400729M/3 FV 730114 ITEM 40 FV 730114/40 T100901M/40 FV 2074654 ITEM 46 FV 775080 ITEM 18 FV 775080/18 70300060095900 FV 2074654/46 FV 2164633ITEM31 GM-D-96765/58 1795783 99-861-9359 FV967575-50 NW1-26Z1 112362ES HAW2819

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer