5310-99-122-8067

Flat Washer

5310991228067 991228067 BS4320-TABLE 1 FORM A ST44323 GR/26767/A ITEM 34 GR/31024/M ITEM 32 GR/34420/A ITEM 17 B90608 MV00002AZ016PT29 FV2149227-43 FV2149234-28 5026411G B62461 991-4-01679-016 MV/00601/AZ/016/27 MV/00601/AZ/016ITEM27 FV 3202754 ITEM 23 MF550102-210 124-3030-207 A0/12317/01 ITEM 50 A4/12317/26 ITEM 50 GR/25773/A ITEM 71 GR/26380/A ITEM 32 5026411 5026411(G4) 1660-003678 MV00002AZ016-29

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer