5310-99-122-8065

Flat Washer

5310991228065 991228065 BS4320-TABLE 1 FORM A ST44323 GR/26357/A ITEM 42 GR/26601/A ITEM 189 GR/26763/A ITEM 55 GR/31000/A ITEM 53 5026403F B90606 C90606 140-702575 ITEM 39 140-702575-39 21313-01302 4711300 991-4-10399-015 991/4/01679/013 FH70-4-6-1000ITEM730 47171-045-00-9 FV667626ITEM18 FV747009 ITEM 67 MM294AITEM730 ML180-0112 63-04-2491-004 MF550102/26 124-3030-125 694-4882-001/165

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer