5310-99-122-6476

Flat Washer

5310991226476 991226476 BS4320 75301001010159 390734X1 ESP7.2.3 11010024 84997915 A0084997915 AC20C335/53 WA110061 272-0694 3948/9 8469 ITEM 9 NC37255/9 883021.36 CK404807ZNQ 36310 0088300532 00883021.36 78.0A.225.P06 GM-B102842ITEM 12 89080 0056988 8469/9 W6854PART7 746006/13

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer