5310-99-122-6475

Flat Washer

5310991226475 991226475 DEF STAN 53-17 75300801010159 BS4320 63/5/00800 SSN.12/W/538/60/1 TM066/HH BS4320FT08.00RD017STOOCRZN 007700007 0077800007 0077800399 0088301136 7700007 7800399 88301136 MP3069A FV2068750 ITEM 18 WA108051 488002118 271451001266 GM-E102829ITEM 88 ND0128 63/5/00800/A 84997998 527-634 CM-E102829ITEM 88

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer