5310-99-122-3415

Flat Washer

5310991223415 991223415 BS4320 SST/Y/264/20/A001/000 ITEM 71 Y/264/20/A001/000 ITEM 71 95148 2381 SST/Y/264/20/A001/000 SHEET 014- 1579/11 2258/11 Y/264/20/A001/000 SHEET 014 ISS- Z/520/0000/3029 PART 230 MB/125/0383 Z/520/0000/3029/230 A2900 95148/0018 49790 ITEM 71 49790/71 2227/1T 03999/20 ITEM 80 SSN.13/Z/520/0000/3029/230 001214161 PART 230 001214161/230 841011116 318015 AB2249/V/86 ITEM 10 SSN13/Z/520/0000/3029/01/230

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer