5310-99-122-3036

Flat Washer

5310991223036 991223036 BS4320 338373X1 GM-D102836ITEM 15 GM-D102837ITEM 16 GM-E102829ITEM 89 GM-E102830ITEM 56 GM-E102832ITEM 75 75301201020159 GM-E102841ITEM 62 961/27/112 5512540-012 WB112081 CH/M/145/4HX9/0001 PART 225 5000226 200490 WD112081 DEFSTAN53-17 BS4320M12TABLE1FORMAZNPL GMD93827-48 ND19209D BS4320BM12 99-781-2757

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer