5310-99-120-3891

Flat Washer

5310991203891 991203891 BS3410 FSP3-28A Z4-30694 44734ES7-8 N02660 GMC611431TEM14 411010080 411010090 15206 86-047-013 1758223 N02660 BS3410 TABLE 3 63-04-1098-15 353-758X1 353758X1 8837370 1763485 1018307 DSR1023-7 626686 K626686 702036 W29473551TEM123 SL241-6 8S00805

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer