5310-99-101-7322

Flat Washer

5310991017322 991017322 BS3410 11-454-7-17-5722 85-25-27-700-2914 NM33076TX M119NM33076TX 11/454/3/93/7717 910-031-0003 9100310003 11-454-3-10-3717 208-6 FL1421AISSUE18ITEM56 5310-101-7322 99-136-6408 99-548-3121 AWS/MCG2 FL352MAITEM41 2903

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer