5310-99-063-0039

Flat Washer

5310990630039 990630039 SSK/M/148/60/0005 SHEET 006 ISS- 001279463/212 SSK/M/148/60/0005 SHEET 006 SSK/M/148/60/0005/006 SSK/M/148/60/0005/212 001279463 001279463 PART 212 001279463 SHEET 006 001279463/006 SSK/M/148/60/0005 SSK/M/148/60/0005 PART 212

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer