5310-27-021-1379
Flat Washer
5310270211379 270211379 1009.1KI.0345-14
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
![5310-27-021-1379 WASHER,FLAT 5310270211379 270211379 1/1 5310-27-021-1379 WASHER,FLAT 5310270211379 270211379 1/1](https://image.nsnlookup.com/fsc/300/5310.webp)
Marketplace 5310-27-021-1379
Request a Quotation from participating marketplace vendors
Related Documents 5310-27-021-1379 5+ Documents (More...)
Flat Washer 5310270211379 270211379 Documents 5310-27-021-1379 5+ Documents ( More... ) https//
995471793 312-3034 5310-99-466-2925 312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379
Related to 5975-99-940-1897 5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379
Restrictions 5310-27-021-1379
End Users 5310-27-021-1379
- Turkey (ZW)
Approved Sources 5310-27-021-1379
- Part Number
- Manufacturer
- Status
- 1009.1KI.0345-14
- Manufacturer
- T0575 - K.K.K.2 Nci Ana Bakim Merkezi (Active)
- Related Standard
- Related Standard