5310-32-086-1984
Flat Washer
5310320861984 320861984 2200004203
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-32-086-1984
Request a Quotation from participating marketplace vendors
Related Documents 5310-32-086-1984 5+ Documents (More...)
5310-99-139-5962 5310-12-378 https//www.nsnlookup.com /fsg-53/fsc-5310/sg 5310-32-086-1984 Flat
Washer 5310320861984 320861984 995918215 021-1379 5310-12-186-8041 5310-32-086-1984 https//www.nsnlookup.com
Flat Washer 5310320861984 320861984 5310/uk 5310-99-458-1581 Flat Washer 5310994581581 994581581
021-1379 5310-12-186-8041 5310-32-086-1984 53 5310/uk 5310-99-999-2784 Flat Washer 5310999992784 999992784
53/fsc-5310/uk 5310-99-999-2784 Flat Washer 5310999992784 999992784 021-1379 5310-12-186-8041 5310-32-086-1984
53/fsc-5310/uk 5310-99-591-8215 Flat Washer 5310995918215 995918215 021-1379 5310-12-186-8041 5310-32-086-1984
Restrictions 5310-32-086-1984
End Users 5310-32-086-1984
- Singapore (YJ)
- United Kingdom (ZK)
Approved Sources 5310-32-086-1984
- Part Number
- Manufacturer
- Status
- 2200004203
- Manufacturer
- Q0091 - St Engineering Land Systems Ltd. (Active)
- Primary Buy
- Primary Buy