5310-25-101-6920
Flat Washer
5310251016920 251016920 V42293
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-25-101-6920
Request a Quotation from participating marketplace vendors
Related Documents 5310-25-101-6920 5+ Documents (More...)
NumberManufacturerStatusHEF4538BDB D2540 - Philips Semiconductors (Obsolete) Primary Buy RNCC 3 RNVC 2 DAC 3 V42293
-D1-K94 C0426 - Hensoldt Sensors Gmbh (Active) Secondary Buy RNCC 5 RNVC 2 DAC 3 V42293-D1-K94 D1180
NumberManufacturerStatusHEF4094BDB D2540 - Philips Semiconductors (Obsolete) Primary Buy RNCC 3 RNVC 2 DAC 3 V42293
NumberManufacturerStatusHEF4538BDB D2540 - Philips Semiconductors (Obsolete) Primary Buy RNCC 3 RNVC 2 DAC 3 V42293
-D1-K94 C0426 - Hensoldt Sensors Gmbh (Active) Secondary Buy RNCC 5 RNVC 2 DAC 3 V42293-D1-K94 D1180
Restrictions 5310-25-101-6920
Approved Sources 5310-25-101-6920
- Part Number
- Manufacturer
- Status
- V42293
- Manufacturer
- N0001 - Nera Asa (Replaced)
- Primary Buy
- Primary Buy