5310-17-032-9497
Flat Washer
5310170329497 170329497 DIN433 NEN2270 1-5DIN433STE3A 1-5DIN433STGALCU3NI5MT 1-5STNEN21458FENI10PNEN2270 1-5DIN433STG3A 252260030003 B050AG1-4
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-17-032-9497
Request a Quotation from participating marketplace vendors
Related Documents 5310-17-032-9497 5+ Documents (More...)
vendors Request Related Documents 1250-99-437-2270 1 https//www.nsnlookup.com /fsg-53/fsc-5310/nl 5310-17-032-9497
Flat Washer 5310170329497 170329497,DIN433 5310-17-032-9497 5310170329497 170329497 is a washer
DIN433 17X12CRNI18-8NEN2270 17DIN433NRST 17DIN433X12CRNI18-8 NE42RVSTC17 A washer having a centrally
NEN2270 6-4NEN2270MSNEN21458CUNI5P 47182060 NE42C6-4D A washer having a centrally located hole with
NEN2270 6-4NEN2270MSNEN21458CUNI5P 47182060 NE42C6-4D A washer having a centrally located hole with
NEN2270 6-4NEN2270STNEN22082FECD5 252260016034 A washer having a centrally located hole with a solid
NEN2270 6-4NEN2270MSNEN21458CUNI5P 47182060 NE42C6-4D A washer having a centrally located hole with
NEN2270 6-4NEN2270STNEN22082FECD5 252260016034 A washer having a centrally located hole with a solid
NEN2270 6-4NEN2270MSNEN21458CUNI10P 252260063034 NE42MSC6-4 A washer having a centrally located hole
NEN2270 6-4NEN2270MSNEN21458CUNI5P 47182060 NE42C6-4D A washer having a centrally located hole with
Restrictions 5310-17-032-9497
End Users 5310-17-032-9497
- France (ZF)
- Netherlands (ZN)
Approved Sources 5310-17-032-9497
- Part Number
- Manufacturer
- Status
- 1-5DIN433STE3A
- Manufacturer
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Definitive Standard
- Definitive Standard
- 1-5DIN433STGALCU3NI5MT
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Definitive Standard
- Definitive Standard
- 1-5STNEN21458FENI10PNEN2270
- H1266 - Stichting Koninklijk Nederlands (Active)
- Definitive Standard
- Definitive Standard
- DIN433
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Incomplete Standard
- Incomplete Standard
- NEN2270
- H1266 - Stichting Koninklijk Nederlands (Active)
- Incomplete Standard
- Incomplete Standard
- 1-5DIN433STG3A
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Secondary Buy
- Secondary Buy
- 252260030003
- H0002 - Philips Electronics Nederland B.V. (Active)
- Secondary Buy
- Secondary Buy
- B050AG1-4
- H0002 - Philips Electronics Nederland B.V. (Active)
- Secondary Buy
- Secondary Buy