5310-17-029-1987
Flat Washer
5310170291987 170291987 5-3DIN433MSE2A 5-3DIN433MSGALNI5MT DIN433 NEN2270 5-3NEN2270MSNEN21458CUNI5P 252260010029 C5-3NE42MS
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-17-029-1987
Request a Quotation from participating marketplace vendors
Related Documents 5310-17-029-1987 5+ Documents (More...)
-5,3-CUZN-E3P DIN433-5,3-MS-E3P N 3502 216 MN 24302750530 5N3210-008-21 5N3210-111-21 5,3DIN433-MS-E3P
Documents 5310-12-143-3451 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5310/nl 5310-17-029-1987
-5,3-140HV-A2 272.314 086 26 336-004 26336-004 5,3DIN433-A2 DIN433-5,3-A2 DIN433-5,3-A2-70 5,3DIN433-
Flat Washer 5310170291987 170291987 5310-17-029-1987 5310170291987 170291987 is a washer having
DIN433 17X12CRNI18-8NEN2270 17DIN433NRST 17DIN433X12CRNI18-8 NE42RVSTC17 A washer having a centrally
NEN2270 6-4NEN2270MSNEN21458CUNI5P 47182060 NE42C6-4D A washer having a centrally located hole with
NEN2270 6-4NEN2270MSNEN21458CUNI5P 47182060 NE42C6-4D A washer having a centrally located hole with
NEN2270 6-4NEN2270STNEN22082FECD5 252260016034 A washer having a centrally located hole with a solid
NEN2270 6-4NEN2270MSNEN21458CUNI5P 47182060 NE42C6-4D A washer having a centrally located hole with
NEN2270 6-4NEN2270STNEN22082FECD5 252260016034 A washer having a centrally located hole with a solid
Restrictions 5310-17-029-1987
End Users 5310-17-029-1987
- Spain (YB)
- Singapore (YJ)
- France (ZF)
- Greece (ZU)
Approved Sources 5310-17-029-1987
- Part Number
- Manufacturer
- Status
- 5-3DIN433MSE2A
- Manufacturer
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Related Standard
- Related Standard
- 5-3NEN2270MSNEN21458CUNI5P
- H1266 - Stichting Koninklijk Nederlands (Active)
- Definitive Standard
- Definitive Standard
- 5-3DIN433MSGALNI5MT
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Incomplete Reference
- Incomplete Reference
- DIN433
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Incomplete Standard
- Incomplete Standard
- NEN2270
- H1266 - Stichting Koninklijk Nederlands (Active)
- Incomplete Standard
- Incomplete Standard
- 252260010029
- H0002 - Philips Electronics Nederland B.V. (Active)
- Secondary Buy
- Secondary Buy
- 252260010029
- H0673 - Alcatel-Lucent Network Systems (Replaced)
- Secondary Buy
- Secondary Buy
- C5-3NE42MS
- H0203 - Thales Nederland B.V. (Active)
- Canceled/Obsolete
- Canceled/Obsolete