5310-17-025-1590
Recessed Washer
5310170251590 170251590 10303073 N5-15-20X27A
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED. View more Recessed Washer
Managed by Netherlands
NSN Created on 10 Jul 1972
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5310-17-025-1590
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5310-17-025-1590 4+ Documents (More...)
) Secondary Buy RNCC 5 RNVC 2 DAC 1 N5-15-20X27 https//www.nsnlookup.com /fsg-53/fsc-5310/nl 5310-17-025-1590
Recessed Washer 5310170251590 170251590 5310-17-025-1590 5310170251590 170251590 is a washer of
Recessed Washer 5310170251590 170251590 5310-17-025-1590 5310170251590 170251590 is a washer of
5310-12-142-3427 5310121423427 121423427 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-15-151-3075 5310151513075 151513075 ROSETTA (1) PIANA
2 | DAC: 5 8 Jul 1972 1010-15-089-0915 Nut SU2307-9-18RNCC: 3 | RNVC: 2 | DAC: 1 1 Jan 1974 5310-17-025-1590
Restrictions 5310-17-025-1590
End Users 5310-17-025-1590
- Brazil (YA)
- Spain (YB)
- Singapore (YJ)
- Malaysia (YW)
- Germany (ZG)
- Netherlands (ZN)
- Italy (ZR)
- Norway (ZT)
- Greece (ZU)
- Turkey (ZW)
Approved Sources 5310-17-025-1590
- Part Number
- Manufacturer
- Status
- 10303073
- Manufacturer
- S3715 - Bofors Ab (Replaced)
- Primary Buy
- Primary Buy
- N5-15-20X27A
- S3715 - Bofors Ab (Replaced)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 5310-17-025-1590
5310-99-617-5290 5310-99-710-3082 5310-99-717-6434 5310-99-849-8750 5310-12-390-7087 5310-12-392-1942 5310-99-713-1470 5310-99-719-3589 5310-12-143-5488 5310-12-300-2174 5310-21-901-8880 5310-99-712-3273 5310-99-149-3020 5310-12-349-3538 5310-12-390-7473 5310-99-641-2487 5310-12-357-6774 5310-21-813-2956