5310-34-031-0115
Flat Washer
5310340310115 340310115 B 6,4 DIN 9021-A
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
Managed by Malaysia
NSN Created on 6 Feb 2004
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5310-34-031-0115
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5310-34-031-0115 5+ Documents (More...)
5310-12-154-6718 5310121546718 121546718 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-12-161-3297 5310121613297 121613297 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5340-14-295-4849 5340142954849 142954849 is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. it may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. it is designed to regulate the distance (take-up) between two points by turning. see also pelican hook and turnbuckle assembly; and tie rod, tensioning, threaded end.
5305-14-281-7221 5305142817221 142817221 is an externally threaded fastener whose threaded portion is of one nominal diameter. it may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. it has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. for items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).
5325-99-634-3248 5325996343248 996343248 is an item of any peripheral shape having flanges or groove(s) on its outer perimeter to provide a self-retaining characteristic when inserted in a hole, clamp, or the like. designed for the purpose of protecting and/or insulating wires, cables and other items passing through it. excludes bushing, nonmetallic; bumper; and insulator bushing.
Restrictions 5310-34-031-0115
Approved Sources 5310-34-031-0115
- Part Number
- Manufacturer
- Status
- B 6,4 DIN 9021-A
- Manufacturer
- 004YK - Avibras Industria Aeroespacial S/A (Active)
- Primary Buy
- Primary Buy
- B 6,4 DIN 9021-A
- Y9991 - Malaysian Army (Active)
- NATO Reference
- NATO Reference
NATO Stock Numbers Related to 5310-34-031-0115
5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813 5310-12-373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100