5310-15-020-1608
Flat Washer
5310150201608 150201608 01-231B16 55.13.019.A
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
July 2023
1
Marketplace 5310-15-020-1608
Request a Quotation from participating marketplace vendors
Related Documents 5310-15-020-1608 1+ Documents (More...)
Flat Washer 55.13.019.ARNCC: 5 | RNVC: 2 | DAC: 1 1 Jan 1974 3120-21-904-2051 Sleeve Bushing 59.31.112
Restrictions 5310-15-020-1608
End Users 5310-15-020-1608
- Brazil (YA)
- Spain (YB)
- Canada (ZC)
- New Zealand (ZE)
- Italy (ZR)
Approved Sources 5310-15-020-1608
- Part Number
- Manufacturer
- Status
- 01-231B16
- Manufacturer
- A0199 - Leonardo S.P.A. Divisione Sistemi Di (Active)
- Primary Buy
- Primary Buy
- 55.13.019.A
- 0124B - Sapa Operaciones Sl (Active)
- Secondary Buy
- Secondary Buy