5310-14-575-5813
Flat Washer
5310145755813 145755813 L23116-200-AGZA
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-14-575-5813
Request a Quotation from participating marketplace vendors
Related Documents 5310-14-575-5813 5+ Documents (More...)
Flat Washer 5310145755813 145755813 Documents 5310-14-575-5813 5+ Documents (More... ) https//www.nsnlookup.com
021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813
Flat Washer 5310145755813 145755813 53/fsc-5310/uk 5310-99-458-1581 Flat Washer 5310994581581 994581581
021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813
53/fsc-5310/uk 5310-99-458-1581 Flat Washer 5310994581581 994581581 378-1384 5310-12-330-7955 5310-14-575-5813
53/fsc-5310/uk 5310-99-999-2784 Flat Washer 5310999992784 999992784 378-1384 5310-12-330-7955 5310-14-575-5813
543-2028 5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27 -330-7955 5310-14-575-5813
Restrictions 5310-14-575-5813
End Users 5310-14-575-5813
- France (ZF)
Approved Sources 5310-14-575-5813
- Part Number
- Manufacturer
- Status
- L23116-200-AGZA
- Manufacturer
- F0111 - Bureau Normalisation Aeronautique (Active)
- Definitive Standard
- Definitive Standard