5310-14-570-8864
Flat Washer
5310145708864 145708864 0971508-109 971508 0971508
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-14-570-8864
Request a Quotation from participating marketplace vendors
Related Documents 5310-14-570-8864 5+ Documents (More...)
-14-570-8864 5310145708864 145708864 is a washer having a centrally located hole with a solid or laminated
Flat Washer 0971508-109RNCC: 5 | RNVC: 1 | DAC: 2971508RNCC: 3 | RNVC: 2 | DAC: 20971508RNCC: 5
Restrictions 5310-14-570-8864
End Users 5310-14-570-8864
- France (ZF)
Approved Sources 5310-14-570-8864
- Part Number
- Manufacturer
- Status
- 971508
- Manufacturer
- F2281 - Thales Las France Sas (Active)
- Primary Buy
- Primary Buy
- 0971508-109
- F2281 - Thales Las France Sas (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 0971508
- F2281 - Thales Las France Sas (Active)
- Secondary Buy
- Secondary Buy