5310-14-564-5392
Flat Washer
5310145645392 145645392 ENISO7093-1-5-200HV-P2A ISO7093-1-5-200HV-P2A
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
September 2023
1
Marketplace 5310-14-564-5392
Request a Quotation from participating marketplace vendors
Restrictions 5310-14-564-5392
End Users 5310-14-564-5392
- France (ZF)
Approved Sources 5310-14-564-5392
- Part Number
- Manufacturer
- Status
- ENISO7093-1-5-200HV-P2A
- Manufacturer
- I9006 - Comite Europeen De Normalisation (Active)
- Definitive Standard
- Definitive Standard
- ISO7093-1-5-200HV-P2A
- I9008 - International Organization For (Active)
- Definitive Standard
- Definitive Standard