5310-14-520-4592

Flat Washer

5310145204592 145204592 525112

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

Managed by France

NSN Created on 17 May 2000

Data Last Changed
July 2023

NATO Update Count
1

NATO Data Quality

5310-14-520-4592 WASHER,FLAT 5310145204592 145204592 1/1 — NSN 5310-14-520-4592 (Generic Image) 1/1

Marketplace 5310-14-520-4592

Need Help?
Request a Quotation from participating marketplace vendors

Updated Every Day

5310-14-520-4592 RQST NE

Updated Every Day

5310-14-520-4592 RQST

Updated Every Day

5310-14-520-4592 RQST NE

Related Documents 5310-14-520-4592 5+ Documents (More...)

https//www.nsnlookup.com
/fsg-12/fsc-1240/no

1240-25-143-0120 Motvekt 1240251430120 251430120,536114

-0120 https//www.nsnlookup.com /cage Leica Geosystems Ag (CAGE Code S3890) DAC: 1 1 Jan 1975 5310-14-520-4592

https//www.nsnlookup.com
/fsg-30/fsc-3040/uk

3040-99-865-6670 Rigid Connecting Link 3040998656670 998656670

3040-99-865-6670 3040998656670 998656670 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).

https//www.nsnlookup.com
/cage

Leica Geosystems Ag (CAGE Code S3890)

4 9 Jul 1983 5306-14-320-6354 A Tete Filete Axe 109233RNCC: 3 | RNVC: 2 | DAC: 1 1 Jan 1975 5310-14-520-4592

https//www.nsnlookup.com
/fsg-58/fsc-5815/us

5815-00-236-6957 Diode Self Test Module 5815002366957

JavaScript in your web browser . 5815-00-236-6957Diode Self Test Module5815002366957 002366957 02-525112
Approved Sources 5815-00-236-6957 Part NumberManufacturerStatus02-525112-1 04655 - General Dynamics Mission

https//www.nsnlookup.com
/fsg-42/fsc-4220/us

4220-01-657-8939 Pull Pin Kit Sleeve 4220016578939 016578939

4220-01-657-8939 4220016578939 016578939 SLEEVE,PULL PIN KIT

Restrictions 5310-14-520-4592

5310-14-520-4592 is a Flat Washer

End Users 5310-14-520-4592

France (ZF)

Approved Sources 5310-14-520-4592

Part Number
Manufacturer
Status
525112: S3890 - Leica Geosystems Ag (Active); Primary Buy; RNCC 3 RNVC 2 DAC 6

NATO Stock Numbers Related to 5310-14-520-4592

5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813 5310-12-373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100