5310-14-468-0485
Flat Washer
5310144680485 144680485 S506
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
July 2023
1
Marketplace 5310-14-468-0485
Request a Quotation from participating marketplace vendors
Related Documents 5310-14-468-0485 5+ Documents (More...)
in your web browser . 5310-14-468-0485Flat Washer5310144680485 144680485 S506 in your web browser .
5920-99-737-3845Cartridge Fuse5920997373845 997373845 S506 TS506 S506/1.25 TDS506 S506-500MA 151-517
/fsg-53/fsc-5310/ca
Flat Washer 5310144680485 144680485,S506 99-737-3845Cartridge Fuse5920997373845 997373845 S506
TS506 S506/1.25 TDS506/1.25 151-520 534-274 172-003 TS506 S506/1.25 TDS506/1.25 151-520 534-274 172-003
S506/3.15A 019950G 228-23451L FV 2164663 ITEM 14 G0051943 221040 UW3333 S506/3.15A 019950G 228-23451L
/3.15A 019950G 228-23451L FV 2164663 ITEM 14 G0051943 221040 UW3333 S506/3.15A 019950G 228-23451L FV
Restrictions 5310-14-468-0485
Approved Sources 5310-14-468-0485
- Part Number
- Manufacturer
- Status
- S506
- Manufacturer
- F4081 - Radio Frequency Systems France (Active)
- Primary Buy
- Primary Buy