5310-14-439-7942

Flat Washer

5310144397942 144397942 E25514B80ZTA E25514B80ZJA E25514B80ZJAPA E25514B80ZTAPA S1ZT080A S1ZT080APA 0240039Q00 99152519 99160582 99161973 0412 8 03070226 RONDELLE M8/A4-160HV/PASSIVE F300 0T 024 4793

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer