5310-14-409-4113

Flat Washer

5310144094113 144094113 3154921

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-14-409-4113 WASHER,FLAT 5310144094113 144094113

Managed by France
NSN Created on 28 May 1986
Data Last Changed
July 2023
NATO Update Count
1
NATO Data Quality
5310-14-409-4113 WASHER,FLAT 5310144094113 144094113 1/1
NSN 5310-14-409-4113 (Generic Image) 1/1

5310-14-409-4113 Stock and Availability Marketplace 5310-14-409-4113

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5310-14-409-4113 RQST NE eBay
eBay Updated Every Day
5310-14-409-4113 RQST eBay
Amazon Updated Every Day
5310-14-409-4113 RQST NE Amazon

5310-14-409-4113 Related Documents Related Documents 5310-14-409-4113 5+ Documents (More...)

3110-12-315-4921 3110123154921 123154921 is an assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion.
5310-21-868-9285 5310218689285 218689285 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
1560-12-384-4373 1560123844373 123844373 is a division or portion of a fuselage body which, when integrated with other portions, forms a fuselage.

5310-14-409-4113 Demil Restrictions 5310-14-409-4113

DEMIL: | DEMILI: | CRITICALITY: | HMIC: | PMIC: | EDC: | ADPEC:

5310-14-409-4113 is a Flat Washer

5310-14-409-4113 End Users End Users 5310-14-409-4113

France (ZF)

5310-14-409-4113 Manufacturers Approved Sources 5310-14-409-4113

5310-14-409-4113 Related Items NATO Stock Numbers Related to 5310-14-409-4113