5310-14-321-1201
Flat Washer
5310143211201 143211201 23113DE080A L23113-80DEA 85-686-4889
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
July 2023
1
Marketplace 5310-14-321-1201
Request a Quotation from participating marketplace vendors
Related Documents 5310-14-321-1201 3+ Documents (More...)
Restrictions 5310-14-321-1201
End Users 5310-14-321-1201
- France (ZF)
Approved Sources 5310-14-321-1201
- Part Number
- Manufacturer
- Status
- 23113DE080A
- Manufacturer
- F0188 - Blanc Aero Industries - Groupe Lisi (Active)
- Primary Buy
- Primary Buy
- 23113DE080A
- F0434 - Align Aerospace France Sas (Active)
- Secondary Buy
- Secondary Buy
- 23113DE080A
- F0074 - Bomap Ste De Boulonnerie Et De (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- L23113-80DEA
- F0236 - Saint Chamond Granat Sa (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 85-686-4889
- F5385 - Section De Codification 85 (Cancelled)
- NATO Reference
- NATO Reference