5310-14-290-9455

Flat Washer

5310142909455 142909455 000MA1050F5REP6 000MA041F17REP6 000MA041F35REP6 000MA041F37REP6 000MA1050F6REP6 321C0-0122REP6 411MA0801REP15 411MA801REP15 000MA022F16REP6 000MA022F36REP6 000MA041F14REP6 321C0-122REP6 000MA0041F14REP6 000MA0041F17REP6 000MA0041F35REP6 000MA022F13REP6 000MA022F34REP6

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer