5310-14-250-8006
Flat Washer
5310142508006 142508006 DH502792 502792
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
July 2023
1
Marketplace 5310-14-250-8006
Request a Quotation from participating marketplace vendors
Related Documents 5310-14-250-8006 4+ Documents (More...)
Flat Washer 5310142508006 142508006 web browser . 5310-14-250-8006Flat Washer5310142508006 142508006
NO PRIMARY REF14-250-8006 DH502792 502792 NumberManufacturerStatusDH502792 F0302 - Safran Transmission
Flat Washer 5310142508006 142508006 5310-14-250-8006 5310142508006 142508006 is a washer having
-14-250-8006 5310142508006 142508006 is a washer having a centrally located hole with a solid or laminated
Restrictions 5310-14-250-8006
End Users 5310-14-250-8006
- France (ZF)
Approved Sources 5310-14-250-8006
- Part Number
- Manufacturer
- Status
- DH502792
- Manufacturer
- F0302 - Safran Transmission Systems (Active)
- Secondary Buy
- Secondary Buy
- 502792
- F0962 - Bugatti Sa (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete