5310-14-232-3386

Flat Washer

5310142323386 142323386 2-01466 000907-06010 E25514B60PFACG MEC10244 720601-24 5042-0RM55 99010550 5310JAM06 15701114-3 157011143 S1PF060ACG S1QA060AL E25514B60GAAL E25514B60QAAL S1GA060AL 0123318L00 05042 1 16 05042 XX 99195916 93-08-06-203 R0NDELLE M,6U/ADX/CDB 12-120-8097 12-121-6671 12-142-0796

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer