5310-14-231-2419
Flat Washer
5310142312419 142312419 JGAE040NL E27611L40AENL 2131611240
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
July 2023
1
Marketplace 5310-14-231-2419
Request a Quotation from participating marketplace vendors
Restrictions 5310-14-231-2419
End Users 5310-14-231-2419
- France (ZF)
- Turkey (ZW)
Approved Sources 5310-14-231-2419
- Part Number
- Manufacturer
- Status
- E27611L40AENL
- Manufacturer
- F0110 - Afnor (Association Francaise De (Active)
- Definitive Standard
- Definitive Standard
- E27611L40AENL
- F1236 - Preault Technologies (Cancelled)
- Original Design
- Original Design
- JGAE040NL
- F0110 - Afnor (Association Francaise De (Active)
- Secondary Buy
- Secondary Buy
- 2131611240
- F9111 - Thales Avs France Sas (Active)
- Secondary Buy
- Secondary Buy
- 2131611240
- F0282 - Crouzet Sa (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete