5310-14-200-3563

8405-21-500-0015 8405215000015 215000015

for $1 a day Upgrade your Account Upgrade 3020-00-500-0015Worm Wheel Gear3020005000015 005000015 5000015
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 5000015

5935-01-500-0015 5935015000015 015000015 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.

3040-14-500-0015 3040145000015 145000015 is a cylinder designed to house a piston and other necessary component parts of a cylinder assembly, actuating, linear. do not use if a more specific name applies.

5365-37-526-2590 5365375262590 375262590 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.