5310-12-701-0697

Flat Washer

5310127010697 127010697 VG95211-ML-127010697 3401A-1-6-10 0500832505399 1-6-10 OST1 34509-80

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-12-701-0697 WASHER,FLAT 5310127010697 127010697

Managed by Germany
NSN Created on 6 Feb 1995
Data Last Changed
January 2023
NATO Update Count
1
NATO Data Quality
5310-12-701-0697 WASHER,FLAT 5310127010697 127010697 1/1
NSN 5310-12-701-0697 (Generic Image) 1/1

5310-12-701-0697 Stock and Availability Marketplace 5310-12-701-0697

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5310-12-701-0697 RQST NE eBay
eBay Updated Every Day
5310-12-701-0697 RQST eBay
Amazon Updated Every Day
5310-12-701-0697 RQST NE Amazon

5310-12-701-0697 Related Documents Related Documents 5310-12-701-0697 2+ Documents (More...)

to enable JavaScript in your web browser . 5310-43-001-4986Flat Washer5310430014986 430014986 3401A-1-6-10
5310-43-001-5392 5310430015392 430015392 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-12-701-0697 Related Items NATO Stock Numbers Related to 5310-12-701-0697