Premium Information is available for this item - Upgrade for $1 a day

5310-12-324-5394

Flat Washer

5310123245394 123245394 38080.050.001 50009143-7 DIN125-A5,3-140HV-A3C A-5.3DIN125ST-A3C

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

Managed by Germany

NSN Created on 27 Feb 1991

Data Last Changed
May 2023

NATO Update Count
1

NATO Data Quality

5310-12-324-5394 WASHER,FLAT 5310123245394 123245394 1/1 — NSN 5310-12-324-5394 (Generic Image) 1/1

Marketplace 5310-12-324-5394

Need Help?
Request a Quotation from participating marketplace vendors

Updated Every Day

5310-12-324-5394 RQST NE

Related Documents 5310-12-324-5394 1+ Documents (More...)

https//www.nsnlookup.com
/fsg-53/fsc-5310/de

5310-12-159-1380 Flat Washer 5310121591380 121591380,51-00123

5310-12-159-1380 5310121591380 121591380 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.