5310-12-307-4940
Flat Washer
5310123074940 123074940 1410100618 1 410 100 618 49004300
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2023
1
Marketplace 5310-12-307-4940
Request a Quotation from participating marketplace vendors
Restrictions 5310-12-307-4940
End Users 5310-12-307-4940
- Belgium (ZB)
- New Zealand (ZE)
- France (ZF)
Approved Sources 5310-12-307-4940
- Part Number
- Manufacturer
- Status
- 1410100618
- Manufacturer
- D8015 - Robert Bosch Gesellschaft Mit (Active)
- Primary Buy
- Primary Buy
- 1 410 100 618
- B1223 - Bosch Robert (Active)
- Secondary Buy
- Secondary Buy
- 49004300
- D2081 - Motorenfabrik Hatz Gmbh & Co. Kg (Active)
- Secondary Buy
- Secondary Buy