5310-12-305-9379
Flat Washer
5310123059379 123059379 DIN988-5X10X0,5 50123200 5X10X0,5DIN988
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
Managed by Germany
NSN Created on 10 Jan 1986
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5310-12-305-9379
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5310-12-305-9379 2+ Documents (More...)
5310-34-040-8045 5310340408045 340408045 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-34-040-7768 5310340407768 340407768 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 5310-12-305-9379
End Users 5310-12-305-9379
- Brazil (YA)
- Spain (YB)
- Belgium (ZB)
- Canada (ZC)
- New Zealand (ZE)
- France (ZF)
- Germany (ZG)
- Republic of Korea (ZH)
- United Kingdom (ZK)
- Netherlands (ZN)
- Portugal (ZP)
- Italy (ZR)
- Denmark (ZS)
- Greece (ZU)
- Turkey (ZW)
- United States of America (ZZ)
Approved Sources 5310-12-305-9379
- Part Number
- Manufacturer
- Status
- DIN988-5X10X0,5
- Manufacturer
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Definitive Standard
- Definitive Standard
- 50123200
- D2081 - Motorenfabrik Hatz Gmbh & Co. Kg (Active)
- Secondary Buy
- Secondary Buy
- DIN988-5X10X0,5
- 0141B - Navantia Sa Sme. (Active)
- Secondary Buy
- Secondary Buy
- DIN988-5X10X0,5
- 409BB - Navantia - Propulsion Y Energia (Active)
- Secondary Buy
- Secondary Buy
- 5X10X0,5DIN988
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Canceled/Obsolete
- Canceled/Obsolete
DLA Procurement Analysis 5310-12-305-9379
NATO Stock Numbers Related to 5310-12-305-9379
5310-12-312-3034 5310-99-466-2925 5310-99-213-6153 5310-12-180-7225 5310-27-021-1379 5310-12-186-8041 5310-32-086-1984 5310-99-139-5962 5310-12-378-1384 5310-12-330-7955 5310-14-575-5813 5310-12-373-6997 5310-12-336-6867 5310-99-151-5142 5310-99-668-2023 5310-27-011-2394 5310-66-158-2482 5310-37-518-5100
Contracting Technical Data File (CTDF) 5310-12-305-9379 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: