5310-12-194-3504

Flat Washer

5310121943504 121943504 DIN125-A10,5-STDBL8451.11 DIN125A10,5ST50DBL8451.11 (241)A396300115936 00115936 8520176 0110 7105 01107105ES8923-01 06150136112 0630001048 91505777 0-115936 DIN125-A10,5-200HV-A3P A10,5DIN125-ST50-A3P A10-5DIN125ST50A3P A10-5DIN125ST50GALZN8C DIN125-A10,5-ST50-A3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer