5310-12-194-3503

Flat Washer

5310121943503 121943503 DIN125-A15-ST50DBL8451.11 (241)A39630-114958 1PA39630-114958 9925150 06.15013-6115 06150136115 0630 001 017 0630-001-017 1712781K1 91699372 296795 84990126 A0084990126 WA114081 WA114001 DIN125-A15-200HV-A3P 0630001052 A15DIN125-ST50-A3P A15DIN125ST50GALZN8C DIN125-A15-ST50-A3P

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer